Preparing a VFC400-USB for first use
Inserting the Batteries
The VFC400-USB operates with two AAA batteries:
1. Remove the screw from the rear compartment lid.
2. Remove the lid, exposing the battery compartment.
3. Insert the AAA batteries in the correct orientation, as shown. The polarity is
marked inside the battery compartment.
The battery compartment is a good place to keep the surplus sensor socket
covers. You may wish to remove these now for each channel you want to
use and add them to the compartment before closing it (see
Probes and the Power
4. Replace the rear cover and the screw.
5. Press any button to turn on the display.
VFC400-USB User Guide
Supply).
12
Adding the
Need help?
Do you have a question about the LogTag VFC400-USB and is the answer not in the manual?