Preparing A Vfc400-Usb For First Use; In The Office; On-Site - CONTROL SOLUTIONS LogTag VFC400-USB Product User Manual

Preparing a VFC400-USB for first use

Preparing a VFC400-USB for first use
Before your VFC400-USB can record temperature data you need to perform a few setup
steps.

In the Office

These steps are completed in your office, using a PC connected to the internet:
1. Install the batteries
2. Download and install the latest version of Control Solutions VTMC 3. You can do
this from the Control Solutions Software Download
3. Configure the unit using Control Solutions VTMC software.

On-site

Once you have completed this process, you can take the logger to the location where it
will be installed:
1. Connect external power
2. Connect the probes
3. Start the logger.
VFC400-USB User Guide
into the unit.
if you use the VFC400-USB in a stationery application.
and place the unit, preferably using a wall mount bracket.
page.
11