Table of Contents
Advertisement
During Recording
Auto Channel Swap starts again if you do not press this button for 30 seconds, or if you
press the
START
/CLEAR/STOP
The Alarm and OK symbols are independently shown for each channel. The red
LED, however, blinks as long as either channel has registered an active alarm,
and the buzzer will continue to operate.
The Auto Channel swap function is disabled
when the logger is stopped;
l
when the logger's power save feature is enabled, and it is powered by batteries; or
l
during review.
l
Please see
Reviewing Day Statistics on the Display
button operates while reviewing data.
Channel
VFC400-USB User Guide
button.
for information about how the
36
Advertisement
Table of Contents
