Stopping The Vfc400-Usb - CONTROL SOLUTIONS LogTag VFC400-USB Product User Manual

Stopping the VFC400-USB

Stopping the VFC400-USB
You can configure a VFC400-USB so it can be stopped with the
This feature is useful when you take the logger out of a shipment and don't want to
falsify the statistics with readings taken after the shipment completion. The stop
function is enabled in the
following will stop the unit:
Press and hold the
START
is shown in addition to the
STOPPED
Keep holding the button until the
disappears, then release the button within 2
seconds.
is shown permanently on the display and
STOPPED
the logger will no longer take readings.
The last recorded temperature is now no longer
shown, but minimum and maximum trip values
remain.
The logger will not stop if you
release the button before the
l
disappears; or
keep holding the button after
l
remains permanently on until the
symbol reappears.
Once the logger has stopped, the last alarm status before the logger stopped will
continue to be indicated with a cross or a tick symbol on the display, for each
VFC400-USB User Guide
Advanced Settings tab during configuration. When enabled,
button.
/CLEAR/STOP
symbol.
symbol
symbol
STOPPED
button.
START
/CLEAR/STOP
49