CONTROL SOLUTIONS LogTag VFC400-USB Product User Manual page 20

Preparing a VFC400-USB for first use
Advanced Configuration Settings
Select Advanced Settings for additional configuration settings. These settings decide
how some of the elements are displayed on the unit's own display and set certain
options specific to the VFC400-USB.
Figure 5: VFC400-USB advanced configuration screen in Control Solutions VTMC 3
These parameters influence what appears on the display:
Pausing alarm/statistics processing (see
l
Switching off the display after 30 seconds (Power save, see
l
Allowing a user to reset the trip's minimum and maximum values on the display
l
during recording
Following parameters influence specific behavior of the VFC400-USB:
Clearing and resetting alarms when the
l
Leaving the alarm turned on, even if readings return to the normal temperature
l
range again
Allowing the user to stop the logger with the
l
Allowing the user to reset the logger with the
l
Enabling the three tone sounder for the audible alarm
l
For detailed information about each parameter please read the section about
Configuring a LogTag for logging in Control Solutions VTMC's User Guide or press F1 for
help.
VFC400-USB User Guide
(see Clearing the Min/Max Values on page 42)
Paused Readings on page
Power Save on page
button is pressed
START
/CLEAR/STOP
START
/CLEAR/STOP
START
/CLEAR/STOP
20
39)
41)
button
button