Safety & Emc Approvals - TDK-Lambda Genesys GSPS10-3000 Product Safety & Installation Manual

SAFETY/EMC Approvals
IEC 61010-1 - CB Test Report and Certificate.
EN 61010-1 - CE Mark.
IEC/EN 61204-3 - Industrial environment.
Marking of the CE symbol indicates compliance to the EMC Directive, the Low Voltage Directive and RoHS
Directive of the European Union.
CE "Declaration of Conformity" in accordance with the preceding directives and standards has been made
and is available on a file at our EU representative TDK-Lambda Germany GmbH, Karl-Bold-Str. 40,
Achern.
UKCA Marking, when applied to a product covered by this handbook, indicates compliance with the Electrical
Equipment (safety) Regulations 2016, Electromagnetic Compatibility Regulations 2016 and Restriction of the
Use of Certain Hazardous Substances in Electrical & Electronic Equipment regulation 2012.
UKCA "Declaration of Conformity" in accordance with the preceding directives and standards has been made
and is available on a file at our UK representative TDK-Lambda UK Limited, Kingsley Avenue, Ilfracombe,
Devon EX34 8ES.
Declarations may be accessed via company web site:
https://www.emea.lambda.tdk.com/uk/technical-data/data.aspx?resource=Safety-Certification
This product is designed for an industrial environment. In a residential, commercial or light industrial
environment it may cause radio interference. The user may be required to take adequate measures to
reduce interference.
This product is a professional equipment, which is not intended for sale to generic public.
SAFETY & EMC APPROVALS
WARNING
NOTE
5