3DGence INDUSTRY F340 Maintenance Manual page 22

Sheet metal edge
the fifth black mounting hole of the
linear guide
7. Measuring the timing belt tension on the X1 axis (Fig. 38):
•
Place the phone with the microphone facing the toothed belt side at the third black mounting hole of the
linear guide counting from the right side of the printer (Fig. 41).
Fig. 41 Measurement location of the timing belt tension on the X1 axis
•
Select the start button in the app.
•
Make the timing belt vibrate by vigorously jerking it like a guitar string until the measuring fields in the
app light up green.
Fig. 42 Measuring the timing belt tension on the X1 axis
3DGence INDUSTRY F340 - maintenance activities | version 04.2019
set in the middle of
4 5
Fig. 40 Positioning the carriage on the Y axis
page 22of 24