Adjusting Timing Belts - 3DGence INDUSTRY F340 Maintenance Manual

12. ADJUSTING TIMING BELTS

Recommended frequency: every six months or 2,000 hours of printer service.
Procedure for measuring toothed belt tension:
1. Download the free app "Tension2Go" to your phone (Fig. 34). The app is designed for Android phones.
Fig. 34 Tension2Go application icon
2. Run the "Tension2Go" app on your phone.
3. Select the "Please select belt" tab (Fig. 35).
Fig. 35 "Please select belt" tab in Tension2Go app
page 19of 24
3DGence INDUSTRY F340 - maintenance activities | version 04.2019