3. Remove the top cover from the printer and place on a flat surface as shown in the picture (Fig. 10).
Fig. 10 Removing the top cover from the printer
4. Unscrew the 6 DIN7984-M4x6 screws from the top cover of the printer (Fig. 11). Put aside the DIN125-M4
screws and washers.
Fig. 11 Unscrewing 6 DIN7984-M4x6 screws from the top cover of the printer
5. Turn the top cover upside down as shown in the picture (Fig. 12).
Fig. 12 Reversing the top cover
page 11of 24
3DGence INDUSTRY F340 - maintenance activities | version 04.2019