Using The Product; Particle Reading Display - TESTO 380 Instruction Manual

6

Using the product

6.1.

Particle reading display

The measurement parameters for the Particle measurement type
are predefined and cannot be adjusted.
Overview of measurement parameters:
Display
3
g/m
3
g/m
3
g/m
% O2
ppm CO
mg/m
°C FT
°C AT
% FH
Measurement parameter
PMØ Mean value of the particulate mass since the
start of the measurement
PMØu
Averaged end result dust less measurement
uncertainty (only displayed at the end of
a measurement).
COØu
Averaged end result CO less measurement
uncertainty (the result is only displayed at the
end of a measurement).
Oxygen concentration
Carbon monoxide concentration
3
CO Carbon monoxide concentration
Flue gas temperature
Combustion air temperature (measurement
only possible and permitted with external
temperature probe 0600 9787).
Flue gas humidity (calculated)
The mean value display of the following readings can also
be set:
% O2, ppm CO, mg/m
mbar draught
3
CO, °C FT, °C AT, % qA, % FH,
6 Using the product
31