Playing A Disc With Skip Ids - Pioneer Elite PRB-19RW Operating Instructions Manual

Playing a Disc with Skip IDs

After recording a - disc, you may decide that one or more of the tracks are unwanted. This may be due to a simple
CD R
mistake or because a track didn't record successfully. Although you can't erase those tracks, you can set what are called
'skip s'. These tell a player not to play a particular track, but to skip to the next one on the disc. For more information
ID CD
on setting and clearing skip
ID
If you're not sure whether a disc has skip
disc — it will light automatically if one or more are present.
The indicator
SKIP ON
lights if there are skip
s present on the disc.
ID
2
◊ÛB - ,/Bˆ
Digital Recording System
s, see page 31.)
s programmed, look for the
ID
1
Load a disc.
The
SKIP ON
player is in skip play mode (in other words, it won't play those tracks that
are marked by skip
2
Press SKIP PLAY to switch skip play on/off, then
press 3 (play).
When you turn off skip play mode the player ignores the skip
plays all tracks on the disc.
❖
If there were no skip
button has no effect.
Additional Playback Features
indicator in the display when you load a
SKIP ON
indicator lights if there are any skip
s).
ID
s on the disc in the first place, the
ID
s on the disc, and the
ID
s and
ID
SKIP PLAY
<PRB1286>
27