Table of Contents
Advertisement
Basic Playback and Recording
Automatically
Recording One Track from a Digital Source
If you want to record just a single track, or a few selected tracks, from another
The recorder starts and stops automatically, and there's no need to worry about recording levels—you'll get a perfect digital
copy of the original. Before you start, make sure that your digital source is properly connected to one of the recorder's digital
inputs — see Connecting Up for Digital Playback & Recording on page 10 for more on this.
If you're recording all the tracks on the source, see Automatically Recording All Tracks from a Digital Source on the next
page. If you're recording from some other digital source, turn to Manually Recording from a Digital Source on page 23. If
you're recording from any source through the analog inputs, see Recording an Analog Source on page 24.
1
3
3
The display shows the 1-track
sync mode, and the sync indicator
blinks to show that recording can
start anytime.
Press
DIGITAL SYNCHRO
to change the recording mode:
1-track sync mode
All-track sync mode
Record-pause mode
(no sync)
20
<PRB1286>
1
2
2
Hi-bit Legato Link Conversion
3
6
4
repeatedly
5
6
CD
Load a CD–R or CD–RW disc.
Check the display to make sure that there's enough space on the disc
for what you want to record.
Set the INPUT SELECTOR to either COAXIAL or
OPTICAL.
Set to whichever input your source is connected to.
Make sure that the source is not playing, then
press DIGITAL SYNCHRO.
Digital synchro recording won't work if the source is already playing!
Wait for the recorder to indicate it's ready to record with a blinking
Play the source.
The recorder starts recording automatically.
The recorder enters record-pause mode after
recording one track.
❖
If you're recording a
or
CD
the track changes or there is more than five seconds of silence on the
source.
❖
If you're recording from
DCC
recorder encounters a track start
seconds of silence on the source (See Notes on digital-input recording
from
on the previous page for possible problems.)
DAT
If you're done, press 7 (stop).
To record further tracks, simply repeat steps 3 to 5.
After pressing 7 (stop), the display shows
❖
the track information to the disc.
, an
,
or
, this mode is ideal.
MD
DCC
DAT
, the recorder stops automatically when
MD
or
tape, recording stops when the
DAT
or there is more than five
ID
while it records
PMA REC
.
SYNC
Advertisement
Table of Contents
