Showing Disc Information - Pioneer Elite PRB-19RW Operating Instructions Manual

Showing Disc Information

The PDR-19RW can display various kinds of disc and track information in both playback and recording modes. The
button (available from either the front panel or the remote) switches between the different display modes. Additionally, in
stop mode, individual track information is available from the track skip buttons (4 and ¢). Finally, you have the option to
switch off the display completely.
c a,b
Hi-bit Legato Link Conversion
d
◊ÛB - ,/Bˆ
Digital Recording System
a
During playback, press TIME to switch display
mode.
There are four different displays. Press
between them:
Elapsed playback time
Total disc running time
and number of tracks
b
During recording, press TIME to switch the display
c
mode.
There are three different displays. Press
between them:
Elapsed recording time
a,b
c
In stop mode, press 4 or ¢ to display
individual track length information.
Each press moves forward or back one track on the disc and shows the
length of that track.
d
Press DISP OFF to switch between display modes.
Each press switches the display mode as follows:
Level meter only off = display off = normal display
❖
In display off mode the indicator above the button lights to remind
you that the display is switched off.
❖
Pressing the
disc information for a few seconds.
❖
You can't switch the display off during recording, or during pause mode.
Basic Playback and Recording
TIME
Remaining playing time
of current track
Remaining playing time
of all tracks
TIME
Remaining recording time
Total recording time and number of tracks
button with the display switched off will display
TIME
TIME
repeatedly to switch
repeatedly to switch
<PRB1286>
17