Table of Contents
Advertisement
Additional Information
Understanding Display Messages
Below is a list of messages you'll see during normal operation of the PDR–19RW together with a brief explanation of what
they mean. If you need more information, turn to the page indicated.
Message
OPEN
CLOSE
SET UP
TOC READ
1-SYNC
AL-SYNC
CAN NOT SYNC
MONI INPUT
(CD, MD, DAT, DCC)
PMA REC
TRACK ?
SKIP SET?
SKIP CLEAR?
LAST TRACK
ERASE?
ALL TRACK ERASE?
ALL DISC ERASE?
PIONEER CD-R
36
<PRB1286>
Description
The disc tray is open.
The disc tray is closing.
The unit is setting up for recording. Wait for the message to disappear.
The recorder is reading the disc's
message to disappear.
The unit is in 1-track automatic digital recording mode. Recording starts when
the recorder detects the source input signal.
The unit is in all-track automatic digital recording mode. Recording starts when
the recorder detects the source input signal.
This display appears when the
is set for an analog source, or in digital mode if the source selected
SELECTOR
is not recognized as
,
,
CD
MD
The recorder is monitoring the input selected with the input selector. The unit
displays the source it is monitoring (
The recorder is writing
data to the disc's
TOC
Never turn off the power while this display is showing.
The player is waiting for you to enter a track in program play mode. Select a
track using the numeric buttons or 4 and ¢ (track skip) buttons.
Confirm that you want to set a skip
Confirm that you want to set a skip
Confirm that you want to erase the last track of a
(pause).
Confirm that you want to erase all tracks on a
(pause).
Confirm that you want to re-initialize the
This display is for in-store demonstration purposes. The demonstration stops
when any key or control is operated. If no key or control is pressed for about
three minutes after the demonstration was stopped, it will start again.
To start the demonstration mode, switch on the power and press 4 1
while the player is reading the disc's
41 as soon as the display reads 00 00:00.)
To cancel the demonstration mode, switch on the power and press ¡¢
while the player is reading the disc's
¡¢ as soon as the display reads 00 00:00.)
(Table of Contents). Wait for the
TOC
button is pressed if the
DIGITAL SYNCHRO
, or
.
DAT
DCC
,
,
, or
).
CD
MD
DAT
DCC
(Program Memory Area).
PMA
by pressing the
ID
SKIP ID SET
by pressing the
ID
SKIP ID CLEAR
disc by pressing 8
–
CD
RW
disc by pressing 8
–
CD
RW
disc by pressing 8 (pause).
–
CD
RW
. (If there isn't a disc loaded, press
TOC
. (If there isn't a disc loaded, press
TOC
Reference
p.15
p.15
p.20
p.21
INPUT
p.30
p.25
button.
p.31
button.
p.32
p.34
p.35
p.35
Advertisement
Table of Contents
