Choosing A Track To Play; Repeating Tracks - Pioneer Elite PRB-19RW Operating Instructions Manual

Compact disc recorder
Table of Contents

Advertisement

Basic Playback and Recording

Choosing a Track to Play

You can select tracks to play in a couple of different ways. The track skip buttons jump through the tracks on a disc in
sequence, either backwards or forwards. Alternatively, you can jump directly to a particular track number using the number
buttons on the remote control unit.
a

Repeating Tracks

Using the repeat play function you can repeat either the current track over and over, or the entire disc. Note that the repeat
function is only available from the remote control.
16
<PRB1286>
a
Hi-bit Legato Link Conversion
b
a
b
>10
a
a,b
b
While a disc is playing or paused, press 4 or ¢
to jump back to the beginning of the current track,
or forward to the beginning of the next track.
Note: On the recorder itself, the 4 1 and ¡ ¢ buttons serve as
both fast forward/reverse ( 1 and ¡ ) and track skip ( 4 and ¢ )
buttons. To use as track skip buttons, press but don't hold.
Further presses take you backward or forward through the tracks on
the disc.
If you're in program-play mode, the track skip buttons take you to the
previous/next track in the program (see page 25 for more on this).
While a disc is stopped, paused or playing, enter
the track number you want to play.
The recorder jumps directly to that track. If the recorder was in stop
mode, the track then starts playing.
For track numbers 1 to 10, use the corresponding number button.
For track numbers over 10, press the >10 button, then enter the track
number. For example, to select track 28:
To repeat the current track, press REPEAT once.
The
-
indicator lights in the display and the current track repeats until
RPT
1
you either press 7 (stop), or skip to another track (using one of the
methods described above). Either way, repeat mode is cancelled.
You can use repeat track in normal, program or random play modes.
To repeat the whole disc, press REPEAT twice.
The
indicator lights in the display and the
RPT
either 7 (stop) or
again (in which case the disc continues playing
REPEAT
to the end, then stops).
You can use repeat disc in normal or program play modes.
repeats until you press
CD

Advertisement

Table of Contents
loading

Table of Contents