Skipping Unwanted Tracks - Pioneer Elite PRB-19RW Operating Instructions Manual

Skipping Unwanted Tracks

After recording a - disc, you may decide that one or more of the tracks are unwanted. This may be due to a simple
CD R
mistake or because a track didn't record successfully. Although you can't erase those tracks, you can set what are called
'skip s'. These tell a player (though not all recognize skip
ID CD
on the disc.
You can also set skip s on
ID CD
should you make a mistake in recording.
If you make a mistake when setting a skip
repeatedly setting and clearing skip
1,2
◊ÛB - ,/Bˆ
Digital Recording System
4 2
Hi-bit Legato Link Conversion
– s, although it's probably a less useful feature since erasing the last track is possible
RW
, you can clear it, but be careful: you can set up to 21 skip
ID
s in different recording sessions will reduce this number.
ID
Setting skip
1
Press SKIP ID SET during playback of the track
you want to skip.
❖
If there's no room left on the disc to record another skip
display will show the message
2
The display prompts you to confirm.
Press
SKIP ID SET
or 3 (play).
Use the 4 1 and ¡ ¢ (track skip) buttons to skip to other
❖
tracks that don't have skip
be for the track that is currently playing.
3
Set further skip
4
When you're finished, stop the disc and press
OPEN/CLOSE 0.
Until you eject the disc, the recorder stores the skip
memory. On pressing
information onto the disc.
Additional Recording Features
s) not to play a particular track, but to skip to the next one
ID
s:
ID
.
FULL
again to confirm. To cancel, press either
s set. When you press
ID
s by repeating steps 1 and 2.
ID
0 0 0 0 0 , the recorder writes the skip
/
OPEN CLOSE
s per disc, but
ID
, the
ID
SKIP ID CLEAR
, it will
SKIP ID SET
information in its
ID
ID
31
<PRB1286>