How To Set User Parameters - Yamato DP-5601 Operation Manual

How to set user parameters

The DP-5601 has 41 user parameters. You can change their settings according to the environment of use
so as to achieve optimum operation of the instrument. When changing any of them, refer to the user
parameter table on the next page.
<<Example>> To change the parameter No. 007 (non-addition) from 0 to 1:
Operating procedure
Press the key while
pressing the
Press the key until the
parameter number whose setting
you wish to change appears.
Pressing the
the parameter number.
Using the numeric keys, change
the setting.
Press the key.
To set other parameters, repeat
the above Steps
Press the key. The display
returns to the weight display.
This example shows no load on
the platform of the instrument.
key.
(The setting value blinks.)
key decreases
(The setting value blinks.)
(The setting value blinks.)
to .
(The setting value blinks.)
Panel display
20
Remarks
The display switches to
user parameter setting
mode.
Keep pressing the
automatically cycles
through the parameters in
the forward direction. (The
key has the same
function – only goes
backward.)
If you enter the wrong
number, press the
to clear the entry and enter
the correct number.
key
key