How To Register The Entries; How To Register The Entries Collectively - Yamato DP-5601 Operation Manual

How to register the entries

The DP-5601 can individually or collectively save the tare weight, code number in each call number.
The call numbers No.1 to 100 are available, and 100 sets of data can be stored in total.
Since these data are saved in the internal memory, they cannot be lost even if the instrument is powered
OFF.
The registration of frequently used data simplifies the settings before work, and further improves working
efficiency.

1. How to register the entries collectively

(Method of registering the setting data all at once)
<<Example>> To register the following settings in the call number 70:
Tare weight: 1.50 kg, Code number: 123456
Operating procedure
Enter and set all the data in
advance.
Only the preset data can be
registered.
Press and hold the
(The blinking field is used for
setting a value.)
Press the key.
(The blinking field is used for
setting a value.)
[Entering a call number]
Enter and
order.
(The blinking field is used for
setting a value.)
Press the key.
Panel display
key.
in that
The display returns to indication in
Step (weighing display).
15
Remarks
If there are any measured
objects on the platform of
the instrument after data
setting, remove them from
the platform.
This key works only when
GROSS is zero (i.e. there
is nothing on the weighing
unit).
Pressing the key once
again returns to individual
registration (tare weight).
To cancel the registration,
press the key. After
confirming that the call
number is shown as "000,"
proceed to Step .
The system sounds an
alarm buzzer and cancels
the registration.