How To Call Registered Data - Yamato DP-5601 Operation Manual

The difference between collective registration and individual registration
Registered data are saved in the memory for each call number. At the time of purchase, no data has been
registered in the memory.
<<Example>> To register data in the call number 70:
- Collective registration: saves all preset data.
<Before registration>
Call number: 70
Tare weight: 0.00 kg
Code number: 000000
- Individual registration: saves only a specified item of data.
<Before registration>
Call Number: 70
Tare weight: 0.00 kg
Code number: 000000
Data modification <after registration>
Call number: 70
Tare weight: 3.00 kg
Code number: 123456

How to call registered data

<<Example>> To call the registered data from the call number 70, which was registered in the previous
section:
Operating procedure
Press the key.
Enter and
order.
Press the key.
Collective registration
Individual registration
(Tare weight: 3.00 kg)
Registration of the
tare weight only
Individual registration
(Tare weight: 5.00 kg)
Panel display
in that
17
<After registration>
Call number: 70
Tare weight: 3.00 kg
Code number: 123456
<After registration>
Call number: 70
Tare weight: 3.00 kg
Code number: 000000
Only the tare weight is changed.
Call number: 70
Tare weight: 5.00 kg
Code number: 123456
Remarks
This key works only when
GROSS is zero (i.e. there
is nothing on the weighing
unit).
The setting value blinks.
Enter a call number
whose data you wish to
display.