How To Carry Out Measurement; How To Power Off; How To Rezero - Yamato DP-5601 Operation Manual

How to carry out measurement

Operating procedure
[Turning ON the display]
Press the key.
[Start measurement]
Place an object to be weighed
on the platform of the
instrument.

How to power OFF

Operating procedure
[Turning OFF the display]
Press the key.

How to rezero

Operating procedure
Press the key.
*This resets to zero and
displays "0.00."
Panel display
All lamps come on and "0.00"
signs above " → 0 ← ,"
appears. The
and "STABLE" come on.
e.g.) Capacity: 30kg, Division: 0.01kg
All lamps continuously come on
until the instrument becomes
stable.
The weight of the object appears.
(The following indication shows that
the object weighs 10.00 kg.)
Panel display
Panel display
8
Remarks
If the error code
or
appears after all lamps
come on, refer to page 34.
If the optional printer
JPS-508 is connected and
the error code
appears during use, press
the key and then
key. If the same code
appears, consult with
Yamato Scale's dealer.
If the error code
appears after an object is
placed on the instrument,
the weight of the object
exceeds the measurable
range of the instrument.
Remove the object from the
instrument, and use the
instrument within its rated
operating range.
Remarks
This instrument consumes
standby power even with
the display turned OFF. If
the instrument is to be
unused for a long time,
unplug the power cable.
Remarks
The effective range of
zero reset is within
± 1.9% of the weighing
capacity.