How To Carry Out Automatic Addition; How To Return To Manual Addition - Yamato DP-5601 Operation Manual

2-1 How to carry out automatic addition

Operating procedure
Press the key and then the
key.
[Addition]
Place an object to be weighed on
the platform of the instrument.
When the reading becomes
stable, automatic addition is
carried out and a short beep
sounds.
*To cancel addition, press the
key.
Remove the object from the
platform.
- One cycle of automatic addition is now complete.
- By repeating Steps
The timing of automatic addition can be set at parameter #69.

2-2 How to return to manual addition

Operating procedure
Press the key and then the
key.
Panel display
If the parameter number 035 is set
to any numbers other than "0,"
"SEnd" appears for the preset
seconds.
to , each measurement value is added to the internal memory.
Panel display
12
Remarks
The sign appears
above and then
above the "AUTO."
If the total value has
exceeded the storage
capacity of the internal
memory after addition,
the following error codes
appear.
- The number of
measurement times
has exceeded.
- The total weight has
exceeded.
The display returns to
"0.00."
Remarks
The sign appears
above and then the
sign above the "AUTO"
goes out.