Led Annunciators & Display Messages; Model Cyd211 Display - Omega CYD211 User Manual

3.3 LED ANNUNCIATORS AND DISPLAY MESSAGES
The display units are indicated using LED annunciators below the right side
of the main display.
LED Annunciators
°C The display units are in degrees Celsius.
K The display units are in Kelvin.
°F The display units are in degrees Fahrenheit.
V/Ω The display units are in sensor units, either volts or ohms
depending on input type.
Alarm messages are displayed alternately with the reading when an alarm
condition exists. If both a high and low alarm condition exists (can only
happen when latching alarms are active), then the display will alternate
between the current reading and the alarm high and alarm low messages.
Other display messages are described in Paragraph 5.3.
Alarm Messages
Indicates that the high alarm is active.
Indicates that the low alarm is active.
3-2
Omega Model CYD211 User's Manual
Figure 3-1. Model CYD211 Display
211_Display.eps
Operation