Omega CYD211 User Manual page 45

Visual Basic Serial Interface Program Setup (Continued)
12. Add code (provided in Table 4-3).
a. In the Code Editor window, under the Object dropdown list,
select (General). Add the statement: Public gSend as Boolean
b. Double Click on cmdSend. Add code segment under Private Sub
cmdSend_Click( ) as shown in Table 4-3.
c. In the Code Editor window, under the Object dropdown list,
select Form. Make sure the Procedure dropdown list is set at
Load. The Code window should have written the segment of
code: Private Sub Form_Load( ). Add the code to this subroutine
as shown in Table 4-3.
d. Double Click on the Timer control. Add code segment under
Private Sub Timer1_Timer() as shown in Table 4-3.
e. Make adjustments to code if different Com port settings are
being used.
13. Save the program.
14. Run the program. The program should resemble the following.
15. Type in a command or query in the Command box as described in
Paragraph 4.1.6.3.
16. Press Enter or select the Send button with the mouse to send command.
17. Type Exit and press Enter to quit.
Remote Operation
Omega Model CYD211 User's Manual
4-7