Omega CYD211 User Manual page 10

Interface Specifications (Continued)
Relays:
Number: 2
Contacts: Normally Open (NO), Normally Closed (NC), and Common (C)
Contact Rating: 30 VDC at 1 A
Settings: manually off, manually on, follows alarms
Connector: DB-25 (shares input connector)
Analog Output:
Isolation: Output is not isolated from chassis ground
Update Rate: 7 readings per second
Range:
Resolution:
Accuracy:
Minimum Load Resistance:
Compliance Voltage:
Load Regulation
Scales:
Temperature
0 – 20 K
0 – 100 K
0 – 200 K
0 – 325 K
0 – 475 K
0 – 1000 K
Settings: Voltage or current, scale
Connector: DB-25 (shares input connector)
General
Ambient Temperature: 15 – 35 °C (59 – 95 °F) at rated accuracy,
10 – 40 °C (50 – 104 °F) at reduced accuracy
Power Requirement: Regulated +5 VDC @ 300 mA, +15 VDC @ 75 mA,
–15 VDC @ 15 mA, 5 pin DIN
Size: 96 mm W × 48 mm H × 166 mm D (3.8 × 1.9 × 6.5 inches)
Mounting: Panel mount into 91 mm W × 44 mm H (3.6 × 1.7 inch) cutout
Weight: 0.65 kilograms (1.5 pounds)
Approval: CE Mark
1-4
Omega Model CYD211 User's Manual
500 Ω (short-
circuit protected)
Voltage
0 – 10 V
0.15 mV
±1.25 mV
NA
NA
Sensor Units (Fixed by type)
Diodes: 1 V = 1V
100 Ω Platinum: 1 V = 100 Ω
1000 Ω Platinum: 1 V = 1000 Ω
NTC Resistor: 1 V = 1000 Ω
Current
4 – 20 mA
0.3 µA
±2.5 µA
NA
10 V
±0.02% RDG
0 to 500 Ω
Introduction