BRIGT
Display Brightness Command
Input:
BRIGT <bright>[term]
Format:
nn
<bright> Sets display brightness. Valid entries: 0 – 15,
BRIGT?
Display Brightness Query
Input:
BRIGT?[term]
Returned: <bright>[term]
Format:
nn
CRDG?
Celsius Reading Query
Input:
CRDG?[term]
Returned: <temp value>[term]
Format:
±nnnnnn
Remarks:
Also see the RDGST? command.
CRVDEL
Curve Delete Command
Input:
CRVDEL <curve>[term]
Format:
nn
<curve> Specifies user curve to delete. Only valid entry is
CRVHDR
Curve Header Command
Input:
CRVHDR <curve>, <name>, <SN>, <format>,
<limit value>, <coefficient>[term]
Format:
nn,aaaaaaaaaaaaaaa,aaaaaaaaaa,n,+nnn.nnn,n
<curve>
<name>
<SN>
<format>
<limit value> Curve temperature limit in Kelvin (Unused).
<coefficient> Curves temperature coefficient.
Remarks:
Configures the user curve header.
Remote Operation
Omega Model CYD211 User's Manual
0 = least bright, 15 = most bright. Default = 8.
(Refer to command for description)
21.
(Curve number is used to retain compatibility with
existing instrument line. Curve number 21 must be sent
with the command or else the command will be ignored.)
Specifies user curve. Valid entry: 21.
Curve name. Limited to 15 characters.
Curve serial number. Limited to 10 characters.
Curve data format. Valid entries:
2 = V/K, 3 = Ω/K, 4 = log Ω/K.
Valid entries: 1 = negative, 2 = positive.
4-17