Autotune Value Display - Omega CN9000A Series User Manual

In high resolution mode (tenth degree, 0.1°):
Should error message EE6 occur during tuning, select normal
resolution (Function .18/Option 0), then Autotune and reselect Hi-
resolution mode.

5.1.7 Autotune Value Display

At the end of an Autotune cycle, the AT value is automatically
entered and may be displayed in Functions:
Function .5
Function .6
Function .7
Function .8
For example to see the AT value for Function .5.
STEP
Get into Program Mode:
1
Change to Function .5:
2
Change to Option Mode:
3
Change Option 0 to
4
AT Option:
on left side of the display being
†
lit means that you are seeing the
AT value to the left of the function number.
Prop band/Gain
Derivative time/Rate
DAC/Approach Control
Integral time/Reset
ACTION
Press P
Function (flashing)
Repeatedly
Press
Until you see
Function (flashing)
Press ★
Option (flashing)
Press
DISPLAY
0. 0
0.
5
5
0.
†
2. 3. 5
53