Panel Mounting; Panel Mounting Details - Omega CYD211 User Manual

Omega Model CYD211 User's Manual
2.8

PANEL MOUNTING

The Model CYD211 can be easily panel mounted using the panel mount
brackets included. The Model CYD211 fits in a 91 × 44 mm (3.6 × 1.7 inch)
1
cutout. To panel mount the instrument, unplug the unit and then use a /
16
inch hex wrench to remove the 2 set screws holding the brackets in place.
Remove the 2 panel mount brackets by sliding them towards the rear of the
unit. Then place the unit into the panel cutout. Slide the two panel mount
brackets back into the case of the instrument. Reinstall the 2 set screws and
tighten them until the instrument is secure.
The Model CYD211 can also be purchased with either of two panel mount
adapters. The Model CYD2111 or 2112 will mount 1 or 2 Temperature
Monitors in a ¼ DIN cutout measuring 105 mm Wide × 132 mm High (4.1
× 5.2 inches). See Figure 2-5.
Panel.bmp
Figure 2-4. Panel Mounting Details
Installation 2-9