Wires; Sensors - Omega CYD211 User Manual

6.3

WIRES

Common cryogenic wire available from Omega. Other wire and installation
accessories are also available.
P/N
9001-005 Quad-Twist™ Cryogenic Wire. Two twisted pairs,
phosphor-bronze wire, 36 AWG, 0.127 mm (0.005 inch)
diameter.
9001-006 Duo-Twist™ Cryogenic Wire. Single twisted pair,
phosphor-bronze wire, 36 AWG, 0.127 mm (0.005 inch)
diameter.
9001-007 Quad-Lead™ Cryogenic Wire. Phosphor-bronze wire, flat,
32 AWG, 0.203 mm (0.008 inch) diameter.
9001-008 Quad-Lead™ Cryogenic Wire. Phosphor-bronze wire, flat,
32 AWG, 0.127 mm (0.005 inch) diameter.
6.4

SENSORS

Silicon Diode sensors available from Omega. Other sensors are also
available.
Sensor No.
Series DT-420
Series DT-450
Series DT-470
Series DT-471
Series DT-670
6-2
Omega Model CYD211 User's Manual
The smallest silicon diode Temperature Sensor available. For
installation on flat surfaces. Sensor incorporates the same type
of silicon chip used in the Series DT-470 and DT-471.
Silicon Diode Miniature Temperature Sensor. Same silicon
chip used in the DT-470 configured for installation in recesses
as small as 1.6 mm diameter by 3.2 mm deep.
Silicon Diode Temperature Sensor. Interchangeable,
repeatable, accurate, wide range customized for cryogenics.
An economical version of the DT-470 for applications where
temperature measurements below 10 K are not required.
Omega DT-670 diode temperature sensors offer the best
accuracy across the widest useful temperature range – 1.4 to
500 K – of any silicon diode sensor in the industry. Sensors
within the DT-670 series are interchangeable to the Curve
DT-670.
Cable Description
Sensor Description
Options & Accessories