Input Curve Number Query; Intype; Input Type Parameter Command; Input Type Parameter Query - Omega CYD211 User Manual

INCRV?

Input Curve Number Query

Input:
INCRV?[term]
Returned: <curve number>[term]
Format: nn

INTYPE

Input Type Parameter Command

Input:
INTYPE <sensor type>[term]
Format: n
<sensor type> Specifies input sensor type. Valid entries:
Example: INTYPE 0[term] – Sets input sensor type to silicon diode.
INTYPE?

Input Type Parameter Query

Input:
INTYPE?[term]
Returned: <sensor type>[term]
Format: n
KEYST?
Keypad Status Query
Input: KEYST?[term]
Returned: <keypad status>[term]
Format: n
Remarks: Returns keypad status since the last KEYST?. KEYST?
returns 1 after initial power-up.
KRDG?
Kelvin Reading Query
Input:
KRDG?[term]
Returned: <Kelvin value>[term]
Format: +nnnnnn
Remarks: Also see the RDGST? command.
4-20
Omega Model CYD211 User's Manual
(Refer to command for description)
0 = Silicon Diode
1 = GaAlAs Diode
2 = 100 Ω Platinum/250 5 = NTC RTD
(Refer to command for description)
1 = key pressed, 0 = no key pressed.
3 = 100 Ω Platinum/500
4 = 1000 Ω Platinum
Remote Operation