Service-Maintenance / Wellness Menu Screens; Figure 92 Wellness-Basic Settings Screen - Emerson Liebert iCOM Manual

8.3

Service-Maintenance / Wellness Menu Screens

Maintenance / Wellness Settings allow the user to set maintenance interval, maintenance message,
read the number of starts / stops, and run hours since the last maintenance.
See below and 3.10.1 - Calculating Next Maintenance and Diagnostics for additional details on
these menu screens.
Figure 92 Wellness—Basic settings screen, page 1 of 9
S002 Maintenance Frequency Per year—Sets the number of expected maintenance visits in a one
year time span.
S003 Max Bonus—Increases the time to the next maintenance cycle. Service personnel should
assign a bonus when a service visit finds that all components are working optimally.
S004 Max Penalty—Decreases the time to the next maintenance cycle. Service personnel should
assign a penalty when a service visit finds excessive wear on components.
S005 Last Maintenance—Indicates to service personnel the date of the last visit. This parameter is
set during the service call.
S006 Service Engineer—Provides a label for the service representative to list either the company
name or representative's name.
S007 Confirm PM—Confirms that the service representative has completed the preventive
maintenance and resets the next maintenance date.
S008 Calculated Next Maintenance—Provides a date to when the next expected maintenance
should take place based on the last confirmed PM, component starts, run hours and the
penalty / bonus currently set in the Liebert iCOM.
119
Service Menu Parameters
® ®
Liebert iCOM for Liebert DSE
™