Entering A Password; Figure 11 Entering A Password - Emerson Liebert iCOM Manual

2.2.3

Entering a Password

The password must be entered before any value of the menu item parameter can be changed. There
are three levels of password for preventing unauthorized changes.
1. User menu password allows the operator the ability to change the parameters in the User menu.
The User menu password is 1490.
2. Service menu password enables the operator to changes parameters in both Service and User.
The Service menu password is 5010.
3. Advanced menu password allows the changes to be made in all parameters.
NOTE
Entering the Service menu password permits access to both the User and Service menus.
To enter a password:
1. Navigate to the menu that contains the parameter to be changed.
2. Select Password in the submenu by pressing the Enter key.
3. Press the Enter key to move your cursor to the right side of the screen to select the question
marks.
4. Use the arrow keys to enter the numeral for the password's first digit (the up arrow key moves
from 1 to the next digit).
5. Use the right arrow key to move to the next question mark and repeat Step 4 to enter all digits in
the password.
6. After entering the password, press enter.
If the password is correct, the Actual Level shown to the right of Password will change
from 0 to 1 or 2. The menu will remain locked if the password was incorrect.
NOTE
Returning to the Status menu will require re-entering a password to make changes.

Figure 11 Entering a password

® ®
Liebert iCOM for Liebert DSE
™
Liebert iCOM Display Components and Functions
12