Bluetooth Connectivity; Pairing; Supported Data Transfers - RC Electronics FenixN User Manual

FenixN – user's manual

5 Bluetooth connectivity

System has internal Bluetooth module which is always enabled. At the back of the unit, there is
external Bluetooth antenna, that enables better range. Do not bend or cut this antenna and
keep it away from any metal objects / cables.

5.1 Pairing

To pair your device with system please initiate search of BT device on your PNA/PDA/Android
phone.
FenixXXXX, where XXXX represents serial nr of the unit, will be visible on detected list, when in
range and turned on.
Pair code will be requested to start communication with PDA/PNA and Fenix. Just confirm the
pair code being offered and devices will be successfully paired.
After successful pair, you can connect to system with different applications (Oudie, LK8000,
XcSoar,...) When application connect to it, bluetooth icon will be visible on main vario page.

5.2 Supported data transfers

Data transfer type
GPRMC
GPRMB
GPGGA
PFLAx (Flarm data)
Declaration transfer from unit
Declaration transfer to unit
File transfers
Flight transfers
Supported
yes
yes
yes
yes
no
yes
no
no
61
Document Revision: 1.5.B50
January 2022
Note
If enabled in Data port settings
If enabled in Data port settings
If enabled in Data port settings
If enabled in Data port settings