Main Unit Task Navigation Page - RC Electronics FenixN User Manual

FenixN – user's manual

3.6 Main unit task navigation page

Generated task from airports, turn-points or combination of both can be displayed on Task
Navigation page. Tasks can be uploaded from external SD card to internal memory of the main
unit. For transferring files in to the unit internal memory use Task Options.
Same graphical layout applies for Task navigation page but with the difference of displayed
name and yellow graphical box which is used for displaying current status of the task. Before
continuing with this sub-paragraph, please check previous section for additional information.
Once the tasks are set, task indicator can display current status:
STANDBY – displayed yellow when task is in standby mode. If you cross the start line,

the task navigation will not start.
ARMED – displayed green when the task is armed. Once start line is crossed, task

navigation page will start. To Arm task use Task Options menu.
FINISHED – displayed when the task is finished.

Quick access to Arm or Disarm the task is to short press left rotary-knob. By doing long-press on
left rotary-knob, the pilot can Restart the current task.
By short pressing right rotary knob, Task edit sub-page will be displayed with task information
and current settings.
Task navigation page reference figure.
31
Document Revision: 1.5.B50
January 2022