Table of Contents
Advertisement
FenixN – user's manual
Back on Task edit sub-page, following information and setting can be viewed:
Task time – When flying AAT task, time of task can be set here.
Type – describes which type of task is detected.
T: – or also known as take-off point which does not have to be set, and it's not taken
into account for navigation. Take-off point can be set from the list of turn-points or
airports.
S: – or also known as start point of your task, can be set from turn-points, airports or
zones. Short press with bottom rotary knob will let you enter a sub-page, from where
you can select start-point. Selecting option Goto will display direction to currently set
start point in red line.
1, 2, 3, n – are list of navigation points in your task. Short press on any of these points
will display edit menu sub-page. Following options for editing navigation points are
available:
Goto – will display direction and set currently selected point as navigation point.
o
Select TP – gives option to change current selected point from turn-point list.
o
Select APT - gives option to change current selected point from airports list.
o
Insert TP – will add point from selection in turn-points list. Added point will be
o
inserted above currently selected point.
Insert APT – will add point from selection in airports list. Added point will be
o
inserted above currently selected point.
Zone – can set or edit specification, shape, and type of currently selected point.
o
Delete – will fully erase currently selected point.
o
F: – or finish line settings. Same optional settings apply as for navigation points with the
difference of two additional settings:
Finish < 1000m – is optional setting that can be selected.
o
Finish altitude – determine altitude of finish line.
o
33
Document Revision: 1.5.B50
January 2022
Advertisement
Table of Contents
