FenixS– user's manual
6 Bluetooth connectivity
FenixS Advance and FenixS Basic need an externally Bluetooth module connected to the Data 1
port to enable wireless connection.
6.1 Pairing
To pair your device with FenixS please initiate search of BT device on your PNA/PDA.
FenixSXXXXX, where XXXXX represents serial number of the unit, will be visible on detected list,
when in range and turned on.
Pair code will be requested to start communication with PDA/PNA and FenixS. Just confirm the
pair code being offered and devices will be successfully paired. After successful connection,
Bluetooth icon is visible on main vario page.
6.2 Supported data transfers
Data transfer type
PFLAx (Flarm data)
GPRMC
GPRMB
GPGGA
Supported
yes
yes
yes
yes
42
Document Revision: 1.0
September 2021
Note
Only via BT module
Only via BT module
Only via BT module
Only via BT module