System Settings - RC Electronics FenixN User Manual

FenixN – user's manual

3.10.2 System settings

Just like in user setting, there are sub-menus for system settings:
 Glider
 Transfer
3.10.2.1 Glider
In Glider sub-menu all settings connected to properties of glider can be adjusted:
Select glider – entering setting will display a list of preinstalled types of the glider.

Simply select the type of glider and confirm the selection.
By confirming the type User polar, properties of glider type will be defined with
variables in sub-menu.
Polar A – variable to set polar A parameter of glider.

Polar B – variable to set polar B parameter of glider.

Polar C – variable to set polar C parameter of glider.

Empty mass – variable to set empty mass of glider.

Reference mass – variable to set reference mass of glider.

Max mass – variable to set maximal mass of the glider.

Wing area – variable to set wing area of glider.

Dump rate – variable to set ballast dump rate. Ballast input will automatically calculate

new ballast when ballast dump is detected.
Please see the documentation of your glider for all variables in "Glider" sub-menu.
 Zone
 Inputs
NOTE
Sub-menu Glider.
50
Document Revision: 1.5.B50
January 2022
 Units
 User port