Main Unit Turn-Point Navigation Page - RC Electronics FenixN User Manual

FenixN – user's manual Document Revision: 1.5.B50
January 2022

3.4 Main unit turn-point navigation page

Navigation towards turn-point can be set and viewed on Turn-point navigation page. Once
*.cup files are saved in to internal memory and selected, turn-points will be displayed on the
map as drops like icons.
Turn-point navigation page reference.
All eight nav-boxes indicators on bottom can be set to any type of indicators by using a long
press on right knob.
On top of the screen the name of the navigation page is displayed (TP or turn-point), steering
correction (in degrees) and the name of turn-point.
Since the steering course is calculated from your track and bearing to the target, the wind
component is already calculated into this value. When relative bearing is displayed with zero
degrees and blue line is aligned with red line, you are in fact moving in the direction of the
desired turn-point.
In addition, the wind direction can be always seen on indicator display.
With short press on the right rotary knob, Select turn-point sub-page will be displayed with the
full list of all saved turn-points. For the desired turn-point, search can be done manually or with
the use of quick search function which can be selected in first line of list. In the quick search the
turn-points can be quickly sorted by entering Code, Name or Distance.
28