Rear Of Unit - RC Electronics FenixN User Manual

FenixN – user's manual

4 Rear of unit

The FenixN system contains the following external peripheral connections.
Power (9 – 17 Vdc) – delivery connector to connect external power supply of glider

system.
Data 1 and Data 2 – which is used to connect devices with RS232 communication

protocol.
Indicator is connected to main 80mm unit on Data 1 port and FenixN port on indicator
Input / OAT – to connect extension board for OAT and Inputs peripheral.

Audio – output for speaker.

GPS – SMA connector for external active antenna.

Pst, Ptot and Pte – pressure connections.

Rear of the system.
59
Document Revision: 1.5.B50
January 2022