RC Electronics FenixN User Manual page 56

FenixN – user's manual
3.10.2.6 Data port
Working configuration of the external data ports is set in subpage Data port. The pilot can set
and enable or disable following parameters:
Data port 1 – parameter to set communication speed between the FenixN system data

port 1 and the externally connected device.
and settings are for it!
o BR9600
o BR19200
o BR38400
o BR57600
o BR115200
Data port 2 – parameter to set communication speed between the FenixN data port 2

and the externally connected device. The following speeds can be chosen:
o BR9600
o BR19200
o BR38400
o BR57600
o BR115200
Radio – selecting radio on the list, will set the same communication baud-rate of the

data port 1 as-is for the connected radio.
GPGGA – enabling this parameter, the GPS GPGGA sentence will be sent every second

through data port 1.
GPRMC – enabling this parameter, the GPS GPRMC sentence will be sent every second

through data port 1.
GPRMB – enabling this parameter, the GPS GPRMB sentence will be sent every second

through data port 1.
PFLAx – enabling this parameter, the FLARM sentence will be sent every second through

data port 1.
The following speeds can be chosen:
Data port sub-page reference.
55
Document Revision: 1.5.B50
This connector is based on indicator unit
January 2022