RC Electronics FenixN User Manual page 26

Table of Contents

Advertisement

FenixN – user's manual
Colors of the dots, will display following type of the thermal:
Red circuit – will indicated positive thermal.
Blue circuit – will indicated negative thermal.
Graphically displayed max vario in last circle can be seen on Thermal assistant page as large
white dot.
Displayed green glider represents current positions of the pilot in the thermal. Left hand circling
will display glider on the right side and right-hand circling will display glider on the left side.
To enter the Thermal assistant sub-menu, the pilot must short press on rotary knob.
Thermal assistant sub-menu holds the following functions, which can be enabled or disabled:
Auto switch – enabled will automatically switch to thermal assistant page when circling
is detected.
MacCready colors – will represent climb stronger than 1.2*MC with red dots. Between
1.2*MC and 0.8*MC the color of the dots will be yellow and less than 0.8*MC will
display blue dots.
Max beep / offset – will make the device beep when the glider is approaching the point
of the max value. With offset set, system will generate a beep by a set number of
seconds before max position is reached.
25
Document Revision: 1.5.B50
January 2022

Advertisement

Table of Contents
loading

Table of Contents