Table of Contents
Advertisement
FenixN – user's manual
3.5 Main unit airport navigation page
Navigation towards single airport can be set and viewed on Airport navigation page. Once *.rca
files are saved in to internal memory, selecting the file will display airports on the map.
Same graphical layout applies for Airport navigation page but the only difference is displayed
name of navigation page in the upper part of the disaply (APT). Before continuing with this sub-
paragraph, please check previous section for additional information.
With short press on the right rotary knob, Select airport sub-page will be displayed with the full
list of all saved airports. For the desired airport, search can be done manually or with the use of
quick search function which can be selected in first line of list. In the quick search the airport
can be quickly sorted by entering ICAO, Name or Distance.
To change displayed data on navbox indicator same procedure applies as on Turn-point
navigation page
With the selected land-able point, additional info can be
viewed by pressing left rotary-knob:
Frequency – of the airport for radio contact.
Runway – will display numbers of the runways.
Type – of runways.
o Grass
o Paved
Elevation – of the airport.
Airport navigation page reference figure.
30
Document Revision: 1.5.B50
January 2022
Advertisement
Table of Contents
