RC Electronics FenixN User Manual page 49

FenixN – user's manual
Airspace warning that will indicate when
airspace is nearby. Warning for particular
airspace will be disabled for the day with
short press on bottom knob or put in snooze
for 10 minutes with upper knob.
Airspace confirmation is only valid until
the landing. After new takeoff, airspace
warning will be displayed again.
3.10.1.5 Voice
In the Voice setup sub-menu the pilot can adjust volume and mixer setting for voice warnings.
Sub-menu also includes setting for additional voice alerts, which can be left disabled or enabled
for use during a flight. The "Voice" sub-menu includes following settings:
 Volume
Range: 0% to 100%
 Flarm traffic
Options:
o Enable
o Disable
 Flarm obstacle
Options:
o Enable
o Disable
 Flarm v. distance
Options:
o Enable
o Disable
NOTE
 Mix (vario - voice)
Range: 0% to 100%
 Flarm warnings
Options:
o Enable
o Disable
 Flarm h. distance
Options:
o Enable
o Disable
Airspace warning view.
Voice page reference.
48
Document Revision: 1.5.B50
January 2022