Table of Contents
Advertisement
FENIX – user's manual
Document Revision: 0.1
December 2020
Flight mode
3.1.2
Navigation data is separately set for both flight modes. Device will detect the way of flying and
switch view mode of all informational positions on screens. To always know the flight mode,
status icon is viewed on bottom right position of vario scale.
Figure 7: Displaying that device is currently in straight
Figure 8: Displaying that device is currently in circling flight
flight mode.
mode.
3.1.3 Needle unit's
Main needle units can be view at the bottom right side of the main screen. Selection can be
made between m/s or kts. Changing the Vario climb units is described in subparagraph 3.2.2.3.
Figure 9: Vario units in m/s.
Figure 10: Vario units in kts.
3.1.4 Wind and connectivity status
A small section of the main screen is used to constantly display wind information and the status
of wireless modules. For the pilot, wind information includes values of wind direction and
speed. These values are represented graphically and numerically in a small half circle on the
left side center of the main screen.
Connectivity status icons represents current mode of GPS reception, Flarm and Bluetooth
module. Every module has his own represented icon.
Flarm and Bluetooth conenctions are fully operating if icons are displayed. For GPS reception,
green color will indicate 3D mode, while red will indicate no GPS fix.
3.1.5 Battery status
13
Advertisement
Table of Contents
