Operation; Maintenance And Repair; Cleaning And Care; Inspection And Maintenance - Bosch Rexroth RA 10 Series Instruction Manual

9 Operation

This product is a component which requires no settings or changes during
operation. For this reason, this chapter of the manual does not contain any
information on adjustment options. Use the product only within the performance
range specified in the technical data.

10 Maintenance and repair

10�1 Cleaning and care
Damage to seals and electronics/electrics due to mechanical effects!
A water jet may damage the seals and electronics/electrics of the analog
amplifier!
▶ When cleaning with a water jet, the IP protection class must be observed;
depending on this, the water jet must not be directed at the analog amplifier.
▶ The amplifier must not be cleaned with high pressure and/or steam jet
equipment.
For cleaning and care of the analog amplifier, observe the following:
▶ Check whether all the seals and fittings on the plug-in connections are securely
seated to ensure that no moisture can penetrate into the analog amplifier and
the installation space during cleaning.
▶ Use only water and, if necessary, a mild cleaning agent to clean the analog
amplifier. Never use solvents or aggressive cleaning agents.
10�2 Inspection and maintenance
No special activities are necessary.
10�3 Repair
The analog amplifier cannot be repaired.
When replacing the analog amplifier, make sure that no contamination can
penetrate the mating connector.
▶ Only use original spare parts from Rexroth, otherwise the functional reliability
cannot be guaranteed, and the warranty will be voided.
▶ Spare parts can be found online at www.boschrexroth.com/eshop
Address all questions regarding repair to your responsible Bosch Rexroth service.
Operation | Analog amplifier RA
NOTICE
RE 95230-B/2021-12-01, Bosch Rexroth AG
43/48