Table of Contents
Advertisement
22/28
Bosch Rexroth AG
Commissioning
Fig. 8: Assembly/disassembly of the plug-in screw connectors
8
Commissioning
Uncontrolled connection or disconnection of plug-in connectors!
The device might be destroyed.
Before installation works, and before connecting or disconnecting plug-in
f
connectors to or from the device, the device must be disconnected from the
voltage source or reliably de-energized. Damaged devices due to incorrect
installation are not covered by the warranty!
Observe protection class, voltage supply and environmental conditions ac-
f
cording to data sheet RE 30260.
Before commissioning, make sure that all the seals and caps of the plug-in
f
connections are installed correctly and undamaged to ensure that fluids and
foreign particles are prevented from penetrating the product.
9
Operation
During normal operation, the user does not need to intervene.
In case of power failure during operation, the booster amplifier can be activated
again without any further measures and is then ready for operation.
VT-MSFA1 | RE 30260-B/07.12
Pry out the plug-in screw connec-
tors using the screwdriver
Mating connector in the module housing
Plug-in screw connectors
(4 terminals)
Terminal
Connection lines
NOTICE
Advertisement
Table of Contents
