Symbols - Bosch Rexroth RA 10 Series Instruction Manual

6/48 Analog amplifier RA | About this documentation
Bosch Rexroth AG, RE 95230-B/2021-12-01
Safety instructions are set out as follows:
Type and source of danger!
Consequences of non-compliance
▶ Danger prevention measures
• Warning sign: draws attention to the danger
• Signal word: identifies the degree of the danger
• Type and source of danger: indicates the type and source of the danger
• Consequences: describes the consequences of non-compliance
• Precautions: states how the danger can be avoided
Table 2: Hazard classes as defined in ANSI Z535�6
Warning sign, signal word
DANGER
WARNING
CAUTION
NOTICE
1�3�2 Symbols
The following symbols indicate notices that are not safety-relevant but increase
understanding of the documentation.
Table 3: Meaning of symbols
Symbol Meaning
If this information is disregarded, the product cannot be used and/or
operated to its full extent.
▶
Single, independent action
1� Numbered instruction:
The numbers indicate that the actions must be completed in order.
2�
3�
SIGNAL WORD
Meaning
Identifies a dangerous situation that will result in death
or serious injury if it is not avoided.
Identifies a dangerous situation that may result in death
or serious injury if it is not avoided.
Identifies a dangerous situation that may result in minor
to moderate injury if it is not avoided.
Property damage: The product or surrounding area may
be damaged.