Download Print this page
Digital Check BranchXpress BX7200 Easy Installation Manual

Digital Check BranchXpress BX7200 Easy Installation Manual

Branch capture scanner

Advertisement

Quick Links

BranchXpress
What's Included
▪ BranchXpress BX7200 scanner
▪ Power supply with electrical supply cord
▪ USB 2.0 cable
▪ Ink cartridge
● The label that is located on the bottom of the
scanner contains the exact model description.
BX7200 Easy Installation Guide
®
Installing the Ink Cartridge
● Lift up on the 'Camera 1 Cover' to remove it
and provide access to the 'Ink Cartridge
Platform'.
● Open the ink cartridge package and remove
the protective seal.
● Insert the nozzle end of the cartridge into the
platform while keeping the end of the cartridge
tilted slightly upward. Push down on the rear of
the cartridge until it clicks twice and snaps
into position.
● The cartridge should appear tilted at a slight
angle when it is fully seated. Reinstall cover.
www.digitalcheck.com
Getting Started
● Note: Digital Check does not provide the
required device drivers or scanning software.
Please contact your bank, IT department or
other solution provider for further assistance
with installing the driver or getting the scanning
software set up or installed.
Do not connect the USB cable from the scanner
to your PC before installing the drivers or the
scanning application / software.
Rev 120712

Advertisement

loading

Summary of Contents for Digital Check BranchXpress BX7200

  • Page 1 Rev 120712 What’s Included Installing the Ink Cartridge Getting Started ● Note: Digital Check does not provide the ▪ BranchXpress BX7200 scanner ● Lift up on the ‘Camera 1 Cover’ to remove it required device drivers or scanning software. and provide access to the ‘Ink Cartridge Platform’.
  • Page 2 Note: This is only necessary when installing the Note: Digital Check recommends using our scanner driver or software the first time. MJ1000 Check Jogger to help align the edges www.digitalcheck.com...