Steam Generation System - AEG COMPETENCE B8920-1 Installation And Operating Instructions Manual

Steam Generation System

1
Important: Wipe the steam generator dry after each use. Soak up wa-
ter with a sponge.
Remove any lime residue with water and vinegar.
To prevent the build-up of limescale, use only distilled or decalcified
water, for example, from a water filter.
1
Important: Chemical de-scaling agents can damage the oven's surface
enamel. Always follow the manufacturer's instructions exactly.
Water Drawer and Steam Generator
1. Water and vinegar (about 200 ml) is
not poured directly into the steam
generator, but into the water
drawer in the control panel.
Leave it for about 10 minutes in the
steam generator to take effect.
2. Remove the water and vinegar with
a non-abrasive sponge.
3. Rinse out the steam generator sys-
tem through the water drawer
using clean, decalcified water (100-
200 ml).
4. Soak up remaining water from the steam generator with the sponge
and
wipe dry.
5. Leave the oven door open to let the oven dry out completely.
70