What To Do If - AEG COMPETENCE B8920-1 Installation And Operating Instructions Manual

What to do if ...

The oven will not heat.
"F 9" appears on the dis-
play.
The oven is not heating up,
and the function display is
operating.
A small arrow will light up.
The oven light will not
come on.
If you are unable to remedy the fault with the above assistance, please
contact your specialist dealer or local Service Force Centre.
1
Caution
proved service engineers. Repairs carried out by inexperienced persons
may cause serious injury to the user.
If the appliance has been used incorrectly, the customer service engi-
neer's visit or that of the specialist dealer will not bee free of charge,
even during the warranty period.
3
Advice on cookers with metal fronts:
Because of the cold surface at the front of the cooker, opening the
oven door during (or just after) baking or roasting may cause the
glass to steam up.
74
Fault
The oven has not been
switched on.
The correct time has not
been set.
The required settings have
not been made.
The oven's safety fuse has
been tripped.
The fuse in the domestic
wiring system (fuse box)
has been tripped.
-
The bulb has blown.
Repairs to the appliance should only be carried out by ap-
:
Possible cause Remedy
Switch the oven on.
Set the correct time.
Check the settings.
Check the safety fuse.
Check the fuse.
If the fuses are tripped re-
peatedly, please call a qual-
ified electrician.
Press the mains button.
Set the oven function to
ZERO. Do not switch off
the oven. Press and hold
down the three centre but-
tons simultaneously until a
signal can be heard.
Replace the bulb (see Care
and Cleaning).