Steam Generation System - AEG COMPETENCE B9820-4-M Installation And Operating Instructions Manual

Built-in electric oven
Table of Contents

Advertisement

Replace the side rails
1. Set the rails in the rear attachment
and press into the griip on the
side (1).
2. Insert the screw and tighten (2).

Steam generation system

1
Important: Wipe the steam generator dry after each use. Soak up wa-
ter with a sponge.
3
Remove any lime residue with water and vinegar.
1
Important: Chemical descaling agents can damage the oven's surface
enamel. Always follow the manufacturer's instructions exactly.
Water Drawer and Steam Generator
1. Pour water and vinegar
(about 250 ml) into the steam gen-
erator via the water drawer.
Leave to work for approx. 10 min-
utes.
2. Remove the water and vinegar with
a non-abrasive sponge.
3. Rinse out the steam generation sys-
tem through the water drawer us-
ing clean, decalcified water
(100-200 ml).
4. Soak up water from the steam generator with the sponge and wipe dry.
5. Leave the oven door open to let the oven dry out completely.
48

Advertisement

Table of Contents
loading

This manual is also suitable for:

Competence b9820-4

Table of Contents